Setting method when there is no setting at time that records in Meas.Time
The example：When you record five houres.
① Meas.Time is set ot “***” with the Meas.Time key.
② The
[Menu]
key is pushed twice, and it sets it to the Auto mode on
＜Memory＞ 2/3
screen
as follows..
Please refer to P.4 “Record of the Auto mode” for the setting of the Auto mode.
<Memory> 2/2
Mode ：Auto
Interval ：Repeat
I/O ：OFF
Level ：00dB
Samp Time
：Meas Time
Sta：08/10/10 18:16:00
Stp：08/10/10 23:16:00
Set in five hours.
*** ０００ｈ００ｍ００ｓ
63.5 dB
RSR
Stp Z Fast Lp
【※CAUTION】
The record doesn't stop until the
[Start/Stop]
key is pushed by
"Interval:Single"
,
"Samp Time:Meas.Time"
, and
"Meas.Time:***"
.
To Next Page
Loading...
