Chap. I - Multi-Diag Scope Basic User’s Manual
Scope_manual_en-v110.docx — 48 —
Individual items are separated by horizontal line and
display only the information to be actually printed.
There are three control buttons for each item:
Enables or disables printing of the item
Enables modifications to a comment for
this item
Clears (deletes) this record from the print
queue
Note:
Print queue works for numerical measurements.
Printing of oscilloscopic graphs and time behaviours
from the “Record Analyser” occurs separately and the
graph is always printed on a different sheet
Fig. 112 – Print queue preview
To Next Page
Loading...
