Adixen ASM 310 - SD Card Menu; Load;Save Detec. Param.; Leak Detector Parameters

10/15
C 406
Advanced Menu
GB 04708 - Edition 03 - March 12
SD card menu
The SD card allows:
 to load leak detector
parameters,
 to save leak detector
parameters,
 to save recorded test
sequences,
C 300,
 to visualiaze .bmp files on
the applicative window
C 300.
All SD cards in the shop can be used except cards with High Capacity
technology, whatever is its capacity. It is necessary to check that the
SD card is not locked before its use (message "SD card not detected"
displayed).
•Ifyouusetheleakdetectorforseveralapplications,doacongu-
rationslibrary(setparameters)appropriateforeveryapplication.
•Ifyouwanttocongureseveraldetectorsinaidenticalway,use
theSDcardtosaveoftheoneandloadontheotherone.
Load/Save
Detec. Param.
The « Load/Save Detec. Param. » functions allow to load/save current
leak detector parameters, which means factory configuration for
parameters not modified (
C 500) and modifications done by the
user. You can find below a saving example (leak detector parameters
+ control panel parameters).
Leak detector parameters
Don't take commands marked with (*) into account: commands not
validated for this product or for manufacturer R&D only use.
Command (RS 232 code) Read value Parameters command
Depollution param. (?AA) 100-07D [=AA100-07D]
Autocal validation (?AC) E [=ACE]
?AC1 (?AC1) (*) 221-09
?AC2 (?AC2) (*) 372-13
Automatic Autocal (?ACA) D0000500010 [=ACAD0000500010]
Value extern HV cal. (?AEH) 150-09 [=AEH150-09]
Value extern SN cal. (?AES) 500-08 [=AES500-08]
Analog output1 (?AO1) 1 [=AO11]
?AP (?AP) (*) 300-06E [=AP300-06E]
Autozero status (?AZ) D [=AZD]
Auto cycle param. (?CA) DE00100010 [=CADE00100010]
adixen Vacuum Products - ASM 310 Operating instructions