GB 03315 - Edition 03 - March 12
1/2
B 110
Unpacking - Storage - Transport
UnpackingUnpacking
When the equipment is receveid, unpack it carefully: do not discard
the packaging until you have made sure that the unit has not
been damaged during transport. Yet, we advice to keep it for a
possible transport. Check the shock indicator of the detector. Before
opening, check the name of the model and the serial number.
In the event of an anomaly, take the necessary action with the
skipper and notify if necessary.
To get out the detector of its packaging, proceed in the following
way:
Weight: see
A 500.
If you use a hoist to get out the detector, indeed position the hooks
of this one in notches planned for that purpose on the handle.
Free the detector handle
and pull it to the back.
Revolve the handle. If it
stucked, you don't pull it
enough to the back.
Raise the detector.
Supplies
The following parts are supplied with your detector:
a documentation kit.
a calibration certificate ot the internal calibrated leak, stapled
inside the operating manual.
1 SD card (inside the control panel)
1 maintenance kit.
1 plug Sub D 15 pts not wired for I/O.
Power supply cord France and US (other power supply cords :
A 400).
1
2
2
3
3
1
2
3
1
adixen Vacuum Products - ASM 310 Operating instructions
To Next Page
Loading...
