GB 03292 - Edition 03 - March 12
5/7
C 200
Control panel
2
4
6
1
3
5
1
Set points setting: reject set point, audio level,
digital voice, He max.
C 401
2
Method and test mode selection. Inlet vent
management. Correction value. Cycle end.
C 402
3
Filament management, tracer gas selection.
Calibrated leak setting.
C 403
4 Maintenances planning
C 404
5
Detector configuration for the user: language,
unit, password, function keys, applicative
windows
C 405
6
Advanced functions* kept for specific detector
uses. It is necessary to read the operating
manual.
*advanced setting required a good leak detection
knowledge: cell setting, pressure gauge, etc.
C 406
Setting
C 400… C 406
Menu allowing the detector setting access.
• "Setting" menu is also accessible from any window by pressing
simultaneously the keys and .
adixen Vacuum Products - ASM 310 Operating instructions
To Next Page
Loading...
