Adixen ASM 310 - Start;Stop a Test; To Familiarize Oneself with the Control Panel

GB 03301 - Edition 03 - July 2011
1/1
C 100
Getting started with the leak detector
Safely for your leak detector and yourself, you can realize quickly a
vacuum test and discover your leak detector.
Refer to the sheet
B 300 for the installation and detector
starting up in case of doubt
.
Place the blank-off flange on the detector inlet (detector state on
delivery).
Start a test.
The helium signal displays the measured leak value: it corresponds
in our case to the detector background.
Stop the test.
To remove the blank-off flange, do an air inlet
( C 402).





Start/stop a test
Refer to the sheet
C 200
for the control panel description.
Press on the key
several times to familiarize with the
application windows.
Press on the key
several times to discover the 3 function keys
levels proposed.
At each level, press on each function key (on the control panel or
with the key
opposite) to discover its action.



To familiarize oneself
with the control panel
START
STAND-BY
START
STAND-BY
adixen Vacuum Products - ASM 310 Operating instructions