2/6
B 100
Safety instructions
GB 04313 - Edition 03 - March 12
Heavy detector
This product needs special handling precautions due to its weight. It should
be removed from its crate only by staff trained in heavy materials handling:
- make sure the detector is stripped of all excess weight (accessories,
customization, etc.) and the side covers are fastened,
- use the lifting rings provided with the product. The maker can not be held
liable for the consequences of using other rings.
- screw the rings firmly home into the holes, provided, facing in the right
direction to accept the slings,
- never lift the detector by means of a single lifting ring,
- the sling must not form an angle of more than 45 ° from vertical.
Our products are designed to comply with current EEC regulations. Users
making their own modifications to the product are liable to break its
compliance with these regulations, degrade its EMC (electromagnetic
compatibility) rating, and make it unsafe to use. The manufacturer declines
all liability for the consequences of such operations.
Unpacking
Installation
Storage
When storing the detector, please note that we guarantee the reliability
of our equipment for three months in normal storage conditions (see
operating manual for storage temperatures). Beyond this period, factors
like temperature, humidity, or salt in the air can lead to deterioration of
‘sensitive’ items (elastomer, lubricant, etc.).
For storage longer than 3 months, follow the instructions in the operating
manual.
The product’s EMC rating is obtained on the understanding that it is installed
in compliance with EMC rules.
Of special note: in environments that are prone to emit interference,
- use shielded cables and connections on interfaces,
- put earthed screening on the power supply line, from the power source up
to 3 meters (10 ft) from the product cable entry.
Risk of tilting.
Although the appliance meets EEC safety regulations (normal range ± 10 °), it
is advisable to guard against the risk of tilting during handling, installation,
and use.
ASM 380 detector.
When the detector is placed on a gradient of more than 3 ° (6 %), it can drag
the operator along due to its heavy weight:
- use castors to move it,
- locate it on flat, hard ground,
- do not push it sideways or press on its side faces,
- do not leave objects leaning on the side of it.
The detector is not designed to carry people or loads and is not for use as a
seat or step.
adixen Vacuum Products - ASM 310 Operating instructions
To Next Page
Loading...
