6/6
B 112
Product labelling
GB 04701 - Edition 01 - November 12
Pumps
Located on the rear of the pump, this label warns the user
against possible risk of injury due to any hand contact with hot
surfaces. It states that protective gloves should be used before
performing any intervention.
Located on the upper cover, this label indicates that due to its
heavy weight the product should not be handled manually, but
always through appropriate handling devices.
Located on the upper cover, this label indicates that some of the
internal parts are energized and could cause electrical shocks
in case of contact. It advises to disconnect the pump before any
intervention or to properly lock-out and tag-out the equipment
breaker before any intervention on the pump.
Located on the upper cover, this label informs the user that
moving parts present inside the pump could cause personal
injury, like crushing or cutting. The user must keep all body parts
away from moving parts.
HOT SURFACE
Contact may cause burn.
Do not touch or wear protective gear before
servicing.
WARNING
WARNING
HEAVY OBJET
Can cause muscle strain or back injury.
Use lifting aids and proper lifting techniques
when removing or replacing.
WARNING
HAZARDOUS VOLTAGE ENCLOSED
Voltage or current hazard sufficient to cause
shock. Disconnect and lockout power before
servicing.
WARNING
MOVING PARTS PRESENT
Moving parts can crush and cut.
Keep hands or feet aways from moving parts.
adixen Vacuum Products - ASM 310 Operating instructions
To Next Page
Loading...
