5/6
B 112
Product labelling
GB 04701 - Edition 01 - November 12
This label indicates a detector ground point.
Located on some electronic boards, this label indicates that some
of the internal parts are energized and could cause electrical
shocks in case of contact.
Located on the frame, this label indicates that some of the
internal parts are energized and could cause electrical shocks
in case of contact. This label recommends disconnecting power
supply cable and waiting 5 minutes before any maintenance
operation.
Located on some electronic boards, this label indicates that some
of the internal parts are energized and could cause electrical
shocks in case of contact. This label recommends:
Do not using the leak detector with the power supply cable
not connected to the ground,
disconnecting electrically the leak detector before any
maintenance operation.
Located on some electronic boards, this label indicates that some
of the internal parts are energized and could cause electrical
shocks in case of contact. This label recommends disconnecting
electrically the leak detector before removing the cover.
DO NOT OPERATE WITH
UNGROUNDED POWER CABLE
DISCONNECT AND WAIT 5 MN
BEFORE MAINTENANCE
DO NOT OPERATE WITH
UNGROUNDED POWER CABLE
DISCONNECT BEFORE MAINTENANCE
DISCONNECT POWER CABLE
BEFORE REMOVING COVER
adixen Vacuum Products - ASM 310 Operating instructions
To Next Page
Loading...
