Adixen ASM 310 - Remote Control; English Serigraphy; Cable for Remote Control

4/16
A 400
Accessories
GB 03329 - Edition 06 - February 12
The remote control is equipped with magnets allowing the operator
to place it on a magnetized surface. The operator can read the
helium signal and has access to control keys such as cycle command
autocalibration and auto-zero.
C3
Remote control
mbar l/s
or Torr l/s
or Pa m
3
/s
Japanese serigraphyEnglish serigraphy
Pa m
3
/s
only
Remote control with 5 m/16.4 feet cable length:
Model Part No
Unit: mbar l/s - Front face in English 106688
Unit: Torr l/s - Front face in English 108881
Unit: Pa m
3
/s - Front face in English 108880
Unit: Pa m
3
/s - Front face in English 106690
Cable only
Cable for remote control (remote control not provided):
Model Part No
Cable of 10 m/32.8 feet/394 inches 101881
Cable of 15 m/49.2 feet/590 inches 101882
Cable of 20 m/65.5 feet/787 inches 802494
Cable of 25 m/82 feet/984 inches 802339
Cable of 30 m/98.4 feet/1181 inches 802767
Cable of 35 m/114.8 feet/1378 inches 802768
Cable of 40 m/131.2 feet/1575 inches 802769
Cable of 45 m/147.6 feet/1772 inches 802770
Cable of 50 m/164 feet/1968 inches 802771
Pa m
3
/s
10
-12
10
-11
mbar l/s
10
-12
10
-11
adixen Vacuum Products - ASM 310 Operating instructions