2/2
B 110
Unpacking - Storage - Transport
GB 03315 - Edition 03 - March 12
Storage
For prolonged storage, factors such as temperature, humidity, saline
atmosphere, etc. may damage the detector elements.
Please call your local representative for further information.
Before starting up after storage for over six months, it is
recommended to change all the seals (contact customer service).
The seals kits must be kept away from heat and light (direct
sunlight and ultraviolet light) in order to prevent hardening of the
elastomers.
Transport
We advise to use the transport case specially designed for the
ASM 310.
Range the accessories
in the foam (optional).
Remove the foam of
the case.
Place the ASM 310
to stop.
Put back the foam.
3
4
2
1
adixen Vacuum Products - ASM 310 Operating instructions
To Next Page
Loading...
