3/6
B 112
Product labelling
GB 04701 - Edition 01 - November 12
1 Firmware name
2 Firmware version
3 Firmware checksum
4 Label edition date
Located on the frame, under the cover, this label indicates for
each firmware load in the leak detector, its version and checksum.
Located on the frame, under the cover, this label indicates
parameters values only necessary to Service Centers for the leak
detector maintenance.
Leak detector quality control comply at factory leaving.
Leak detector conformed with the R.O.H.S. directives.
adixen Vacuum Products - ASM 310 Operating instructions
To Next Page
Loading...
