4.3 Accessories
Part Number Description Notes
GC-POE-
CABLE-20M
20m Ethernet cable for
GNSS Compass
20m CAT5e Ethernet cable with RJ45
Compatible with Ethernet units only (GC2-POE)
IP67 environmentally sealed connector
See Ethernet Connection for full details
GC-NMEA2000-
CABLE
6m NMEA 2000 drop cable
for GNSS Compass
6m NMEA 2000 drop cable
Compatible with serial units only (GC2-SER)
IP67 environmentally sealed connector
See NMEA 2000 Drop Cable for full details
GC-SER-
BREAK-20M
20m serial breakout cable for
GNSS Compass
20m cable to DB9 connectors
Compatible with serial units only (GC2-SER)
IP67 environmentally sealed connector
See Serial Connection for full details
GC-SER-
CABLE-20M
20m unterminated serial
cable for GNSS Compass
20m unterminated cable
Compatible with serial units only (GC2-SER)
IP67 environmentally sealed connector
See Serial Connection for full details
POE-
INJECTOR-DC
DCPOEInjector 24V DC PoE Injector
25W 802.3at Type 2 "PoE+"
Requires 12/24V DC power supply (SUPPLY-24V,
CAR12VPWR or similar)
SUPPLY-24V 24 V DC Power Supply 100-240 V AC Mains to 24 V DC Power Supply (DC jack)
Includes 2-pin plug types A/C/G/I
CAR12VPWR Car auxiliary power outlet
supply
Car auxiliary power supply to 2.1 x 5.5mm DC jack
power supply
CABLE-FTDI USB to RS232 / RS422
cable 1 m
1 m FTDI USB to RS232 / RS422 (selectable) cable
MOUNT-SUCT Suction Cup Antenna Mount Suction cup 5/8” GNSS antenna survey mount for easy
installation of GNSS antenna on vehicles.
Requires 5/8" to 1-14 UNS-2A thread adapter, not
supplied
GC-CASE Rugged Transport Case Rugged Transport Case
Table 7: Ordering Part Numbers for Accessories
v2.0 Page 11 04 Nov 2021
GNSS Compass Reference Manual • Guide to ordering GNSS Compass
To Next Page
Loading...