3 Getting Started
To get started with GNSS Compass for the first time, it is recommended that you begin by establishing
communications to the device, either before or after the unit is installed in its final location. These instructions
assume the use of components provided in the 3 Evaluation Kit , or purchased as Advanced Navigation
supplied optional 4.3 Accessories.
1. Install the GNSS Compass in an area where it has a full clear view of the sky and away from strong radio
transmission sources as shown in Figure 2: GNSS Compass ideal mounting location
Figure 2: GNSS Compass ideal mounting location
2. Ensure that the GNSS Compass is aligned with the vessel such that the indicator on top is aligned pointing
forwards on the vessel. The sight can be used to assist alignment by eye. See Figure 3: GNSS Compass
alignment.
v2.0 Page 4 04 Nov 2021
GNSS Compass Reference Manual • Getting Started with GNSS Compass
To Next Page
Loading...