Figure 39: Setting the Windows Port Latency Value - 3
8.2.4.2 Linux
If serial ports do not show up, the typical reason is a lack of permissions. The user should add themselves to the
dialout group with the command:
sudo adduser username dialout
Compiz causes issues with the 3D mapping. If you are experiencing problems it is recommended to turn off
Compiz.
Modemmanager can also sometimes cause problems on Linux installations. If you are not using a modem, it is
recommended to remove modemmanager with the command:
sudo apt-get remove modemmanager
v2.0 Page 56 04 Nov 2021
GNSS Compass Reference Manual • Configuring and Monitoring GNSS Compass
To Next Page
Loading...