Aeroflex 2023A - Page 144

REMOTE OPERATION
5-35
KLOCK
Disables keyboard entry except RPP Reset and Go to Local
Data type :
None
Allowed suffices :
None
Default suffix :
None
KUNLOCK
Enables keyboard entry
Data type :
None
Allowed suffices :
None
Default suffix :
None
POWUP
[not used alone]
:MODE
Select the power up mode. The instrument can power up in either the factory
preset mode or from a selected memory
Data type :
Character program data (FACTORY or MEMORY)
Allowed suffices :
None
Default suffix :
None
:MEM
Set the memory location for a memory power up
Data type :
Decimal Numeric Program Data
Allowed suffices :
None
Default suffix :
None
Examples:
POWUP:MODE MEMORY
POWUP:MEM 172
POWUP?
Prepares message containing information on the instrument power up selection
in the following format:
Example:
:POWUP:MODE MEMORY;MEM 135
ATTEN
[not used alone]
:LOCK
Lock the attenuators
:UNLOCK
Unlock the attenuators
Data type :
None
Allowed suffices :
None
Default suffix :
None
Example:
ATTEN:LOCK
ATTEN?
Prepares message containing information on whether the attenuators are
locked or unlocked in the following format:
:ATTEN:<status>
where <status> is a program mnemonic indicating whether the attenuators
are locked or unlocked
Example:
:ATTEN:LOCK
IMPEDANCE
Set 50 Ω or 75 Ω adapter mode
Data type :
Character program data (Z50R or Z75R)