232 Firmware Version 5.2
SHAPE FILE CONVERSION
What is commonly called a shape file is actually a collection of three different files. All three of the files
are required and must be present on the USB drive for the system to use shape file groups for variable
rate product application. A single "shape file" can contain recommendation rates for multiple products.
To begin, press the Rate Setup button on the Product Control Toolbox.
The Rate Control Settings screen appears.
1. Open File Selection screen.
Press the Load Prescription button.
2. The File Selection screen appears. Highlight your
desired .shp file and press .
Note: Select the product and units that the shape file prescription was made for.
ExTran
Rate 1:
10.00
Rate 2:
8.00
Increment:
1.00
Prescription:
MInimum Flow:
Full:
800 gal
770 gal
80 gal
10 %
Current:
Rate Control Settings
0
Autopilot_dry.irx
demo_2_liquid.irx
demo_2_liquid_3_dry.irx
demo_3_liquid,irx
demo_3dry_1liq.irx
Field:
Product 1:
Roundup
File Selection
Demo Field
Planting
Application
Product 2:
Product 3:
Product 4:
Product 5:
3 mi
32% UAN
Balance Flexx
-
-
Name
To Next Page
Loading...
Need help?
General
