50 Firmware Version 5.2
4. Return to Home screen
When you complete the steps in the Wizard, you will return to the Home screen.
• For information on Run screen operations, see
“Run screens” on page 51
.
FIELD FINDER
If you have an existing field boundary, and your current GPS position is within that field boundary, the
display will automatically pick the correct Grower, Farm and Field combination when you start a Field
Operation.
• Region button
A region is used to subdivide a field into smaller sections. The region in which data
is currently being logged is listed on the Region button. A new region can be created at any time as you
are performing a field operation.
To change between or add a new region to a field, press the Region button and follow the on-screen
instructions.
• Field Notes button
Edit any of the report items that are listed in Smart Report™. For more information, see
“Smart
Report™” on page 68
.
FIELD OPERATION OPTIONS
During a field operation, you can suspend the field operation by pressing on the wrench at the end of the
Grower Farm Field (Select Event) button. This opens the Events Options screen.
Press Setup
button (wrench)
on Event bar.
The Event Options screen allows operator to change
the Event name, Suspend Event, and to Clear Map
bounds.
Region:
<1>
Event: 2014-01-09_14:40:42
Grower: George Eilers
Farm: Sheldon
Field: Orab
Event Options
Suspend
Event
Event Name
014-01-10_08:3:31
Clear
Map Bounds
To Next Page
Loading...
Need help?
General
