25
SETUP
CONFIGURATION
• Add button
Press to add an operating configuration. A wizard takes you through the process of creating
a configuration.
• When finished, the new configuration appears in the list on the left side of the screen.
• When you highlight the configuration, the equipment in the configuration are listed in the box on the right
side of the screen.
• Information regarding configurations for specific operations is given in each operations chapter.
• Rename button
Press to rename the configuration.
• Setup button
Press to adjust configuration settings.
• Remove button
Press to remove a configuration.
CAUTION: When you remove a configuration all data logged with that configuration will also be removed!
However, all log files will remain in memory until exported to the USB drive.
• Equipment button
Press to add, edit, or remove information for a specific vehicle, implement or controller.
PRODUCT TAB
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Product tab
The Product tab is where you can add, edit. or
remove product information.
The Product tab is where you can perform the following tasks:
• Add or import Planting products.
• Add or import Application products.
• Add Application Product mixes (such as a tank mix, or a dry blend of multiple products).
Equipment
Product
Configuration
Configuration Setup
Product
Equipment
Manufacturer:
Type:
Units:
Restricted Use:
EPA Number:
Fertilizer
No
Planting
Application
T5423
28% UAN
30% UAN
Ag Lime
CSX56A11VT3PRO
CSX56B10CONV
gallons
To Next Page
Loading...
Need help?
General
