© Agilent Technologies 1989–2002 Agilent 3070 / 79000 Site Preparation 10-88
Chapter 10: Site Preparation – Power Requirements for Older Systems: Series 3 Power Requirements and Connections (Prior to May 2000)
3. Calculated with 6 STC cards in the module.
4. POTS and xDSL bays always require a separate power drop. Use the POTS/xDSL power options that is the same line as the system power
option.
5. Values in brackets [] apply to Series 3 systems with serial numbers less than those listed in
Table 10-6 on page 10-79.
To Next Page
Loading...
