© Agilent Technologies 1989–2002 Agilent 3070 / 79000 Site Preparation 3
:
3070 Series I DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Agilent Technologies, Inc.
Manufacturing Test Division
Manufacturer’s Address: 815 14th Street S.W.
Loveland, Colorado 80537
Declares that the Product Name: 3070 (Series I) Board Test Systems
Model Numbers: 3070
Product Options: All
Conforms to the following Product Specifications:
Safety: IEC 348:1978/HD 401 S1:1981
CSA 556B
UL 1244
Safety qualification performed August 1987
EMC: CISPR 11:1990/EN55011 (1991): Group 1, Class A
IEC 801-2:1991/EN50082-1 (1992): 4kV CD, 8kV AD
IEC 801-3:1984/EN50082-1 (1992): 3V/m
IEC 801-4:1988/EN50082-1 (1992): 1kV Power Line, 0.5kV Signal Lines
Attestation is provided according to article 10 (2) of the Directive by a Technical Contruction File.
Technical File Number: 97-0900-010-TCF Rev: A Dated: 25 February, 1997
Supplementary Information: This product also herewith complies with the requirements of the Low Voltage Directive 72/23/EEC and the
protection requirements of the EMC Directive 89/336/EEC (inclusive 93/68/EEC) and carries the "CE" mark accordingly.
A Technical Report/Certificate was issued in accordance with Part V (Reg 50) of the UK Regulations (SI 1992 No. 2372) by a UK-appointed
Competent Body, namely,
Design to Distribution Limited
Westfields House, West Avenue
Kidsgrove, Stoke-on-Trent
Staffordshire, ST7 1TL United Kingdom
Certificate Number: D2D/EMC/CC/007/97 Dated: 10 March, 1997
March 25, 1997
For further information contact your local Agilent Sales and Service office.
To Next Page
Loading...
Need help?
General
