© Agilent Technologies 1989–2002 Agilent 3070 / 79000 Site Preparation 4
:
3070 Series II DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Agilent Technologies, Inc.
Manufacturing Test Division
Manufacturer’s Address: 815 14th Street S.W.
Loveland, Colorado 80537
Declares that the Product Name: 3070 Series II Board Test Systems
Model Numbers: 3070, 72, 73, 75, 79 and 3170, 72, 73, 75, 79 and 3272, 73, 75, 79
Product Options: All
Conforms to the following Product Specifications:
Safety: IEC 1010-1 (1990) Incl. Amend 1 (1992)/EN61010-1 (1993)
CSA C22.2 #1010.1 (1992)
UL 1244
EMC: CISPR 11:1990/EN55011 (1991): Group 1, Class A
IEC 801-2:1991/EN50082-1 (1992): 4kV CD, 8kV AD
IEC 801-3:1984/EN50082-1 (1992): 3V/m
IEC 801-4:1988/EN50082-1 (1992): 1kV Power Line, 0.5kV Signal Lines
Attestation is provided according to article 10 (2) of the Directive by a Technical Contruction File.
Technical File Number: 95-0900-001-TCF Rev: A Dated: 31 March, 1995
Supplementary Information: This product also herewith complies with the requirements of the Low Voltage Directive 72/23/EEC and the EMC
Directive 89/336/EEC (inclusive 93/68/EEC) and carries the "CE" mark accordingly.
A Technical Report/Certificate has been issued in accordance with Part V (Reg 50) of the UK Regulations (SI 1992 No. 2372) by a UK-appointed
Competent Body, namely,
Interference Technology International Limited
41-42 Shrivenham Hundred Business Park
Shrivenham, Swindon, Wilts. SN6 8TZ
England, UK
Certificate Number: ITI/0084/UK Dated: 11 April, 1995
April 20, 1995
For further information contact your local Agilent Sales and Service office.