© Agilent Technologies 1989–2002 Agilent 3070 / 79000 Site Preparation 5
:
3070 Series 3 DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Agilent Technologies, Inc.
Manufacturing Test Division
Manufacturer’s Address: 815 14th Street S.W.
Loveland, Colorado 80537
Declares that the Product Name: 3070 Series 3 Board Test Systems
Model Numbers: 3070, 2, 3, 5, 9 and 3170, 2
Product Options: All
Conforms to the following Product Specifications:
Safety: IEC 1010-1 (1990) Incl. Amend 1 (1992) + Amend 2 (1995)/EN61010-1 (1993) + A2 (1995)
CSA C22.2 #1010.1 (1992)
UL 3111
EMC: CISPR 11:1990/EN55011 (1991): Group 1, Class A
EN50082-1:1992
IEC 1000-4-2:1995: 4kV CD, 8kV AD
IEC 1000-4-3:1995: 3V/m
IEC 1000-4-4:1995: 1kV Power Line, 0.5kV Signal Lines
Attestation is provided according to article 10 (2) of the Directive by a Technical Contruction File.
Technical File Number: 97-0900-030-TCF Rev: A Dated: 12 February, 1998
Supplementary Information: This product also herewith complies with the requirements of the Low Voltage Directive 72/23/EEC (inclusive 93/68/EEC), and
with the requirements of the Machinery Directive 89/392/EEC (inclusive 93/68/EEC), and with the protection requirements of the EMC Directive 89/336/EEC and
carries the "CE" mark accordingly. (Note: Compliance with the Machinery Directive requires equipment installation to be performed in accordance with the
Agilent Application Note, "Compliance with the Machinery Directive requires specific installation procedure.") A Technical Report/Certificate has been issued in
accordance with Part V (Reg 50) of the UK Regulations (SI 1992 No. 2372) by a UK-appointed Competent Body, namely,
Celestica Limited
Westfields House, West Avenue
Kidsgrove, Stoke-on-Trent
Staffordshire, ST7 1TL United Kingdom
Certificate Number: TCR/98/023 Dated: 20 March, 1998
May 1, 1998
For further information contact your local Agilent Sales and Service office.
To Next Page
Loading...
Need help?
General
