© Agilent Technologies 1989–2002 Agilent 3070 / 79000 Site Preparation 6
:
79000 / xDSL DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Agilent Technologies, Inc.
Manufacturing Test Division
Manufacturer’s Address: 815 14th Street S.W.
Loveland, Colorado 80537
Declares that the Product Name: 79000 Series Functional Test Systems
Model Numbers: E2195A, E2196A, E2190A
Product Options: All
Conforms to the following Product Specifications:
Safety: IEC 61010-1 (1990) + A2:1995/EN61010-1:1993 + A2:1995
CSA C22.2 #1010.1:1992
UL 3111-1
EMC: CISPR 11:1990/EN55011 (1991): Group 1, Class A
EN50082-1:1992
IEC 61000-4-2:1995/: 4kV CD
IEC 61000-4-3:1995/: 3V/m
IEC 61000-4-4:1995/: 1kV Power Line
Attestation is provided according to article 10 (2) of the Directive by a Technical Contruction File.
Technical File Number: 99-0900-001-TCF Rev: A Dated: 5 February, 1999
Supplementary Information: This product also herewith complies with the requirements of the Low Voltage Directive 72/23/EEC (inclusive
93/68/EEC), and with the requirements of the Machinery Directive 89/392/EEC (inclusive 93/68/EEC), and with the protection requirements of the
EMC Directive 89/336/EEC and carries the "CE" mark accordingly. A Technical Report/Certificate was issued in accordance with Part V (Reg 50)
of the UK Regulations (SI 1992 No. 2372) by a UK-appointed Competent Body, namely,
Celestica Limited
Westfields House, West Avenue
Kidsgrove, Stoke-on-Trent
Staffordshire, ST7 1TL United Kingdom
Certificate Number: CC/KID/009/99 Dated: 22 February, 1999
February 26, 1999
For further information contact your local Agilent Sales and Service office.
To Next Page
Loading...
Need help?
General
