Agilent 4155C/4156C User’s Guide Vol.1, Edition 11 3-37
Connecting to Network
If You Use a Windows PC
Step 2. Installation
Insert the software CD-ROM into the CD-ROM drive, and wait for the starting of
the setup program. Step through the setup program. Here are the points to watch
when executing the setup program.
1. Select Custom mode for the installation mode.
2. Select the following components:
NFS • Server for NFS
Authentication tools for NFS •User Name Mapping
• Server for NFS Authentication
• Server for PCNFS
3. When installation is completed, you may need to restart the computer. Then
restart the computer, and log on to Windows again.
NOTE If the computer is going to be a client of a NFS server, a software component “Client
for NFS” must be additionally selected in 2 shown above.
Step 3. Server for NFS
1. Click Start, Programs, Windows Services for UNIX, and Services for UNIX
Administration to open the Services for UNIX Administration window.
2. Click Services for UNIX [local] in the component tree of the Services For UNIX
Administration window.
3. Click Settings tab, and fill in the following field.
4. Click Apply.
Field Name Description Example
Computer name Name of the computer used for user
name mapping between Windows and
Unix.
PC001
To Next Page
Loading...
Need help?
General
