Characteristics and Specifications 1
5000 Series Oscilloscopes Service Guide 17
Environmental Conditions
Environment Indoor use only.
Ambient temperature Operating 0 °C to +55 °C;
non-operating –40 °C to +70 °C
Humidity Operating 95% RH at 40 °C for 24 hr; non-operating
90% RH at 65 °C for 24 hr
Altitude Operating to 4,570 m (15,000 ft); non-operating to
15,244 m (50,000 ft)
Overvoltage Category This product is intended to be powered
by MAINS that comply to Overvoltage Category II, which is
typical of cord-and-plug connected equipment.
Pollution Degree The InfiniiVision 5000 Series Oscilloscope
may be operated in environments of Pollution Degree 2 (or
Pollution Degree 1).
Environmental characteristics
Ambient temperature Operating –10 °C to +55 °C; non-operating –51 °C to +71 °C
Humidity Operating 95% RH at 40 °C for 24 hr; non-operating 90% RH at 65 °C for 24 hr
Altitude Operating to 4,570 m (15,000 ft); non-operating to 15,244 m (50,000 ft)
Vibration Agilent class GP and MIL-PRF-28800F; Class 3 random
Shock Agilent class GP and MIL-PRF-28800F; (operating 30 g, 1/2 sine, 11-ms duration,
3 shocks/axis along major axis. Total of 18 shocks)
Pollution degree2 Normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation must be expected.
Indoor use Rated for indoor use only
To Next Page
Loading...
Need help?
General
