Agilent Technologies 5000 Series User Manual

21
Agilent Technologies
Agilent 5000 Series Oscilloscopes
Service Guide
2
Testing Performance
List of Test Equipment 22
To verify voltage measurement accuracy 24
To v e r i f y ba n d w idth 28
To verify time scale accuracy 33
To verify horizontal Dt accuracy 35
To verify trigger sensitivity 38
Agilent 5000 Series Oscilloscopes Performance Test Record 48
This chapter explains how to verify correct oscilloscope
operation and perform tests to ensure that the oscilloscope
meets the performance specifications.
Let the Equipment Warm Up Before Testing
For accurate test results, let the test equipment and the
oscilloscope warm up 30 minutes before testing.
Verifying Test Results
During the tests, record the readings in the Performance Test
Record on page 48. To verify whether a test passes, verify that
the reading is within the limits in the Performance Test Record.
If a performance test fails
If a performance test fails, first perform the User Cal procedure

Agilent Technologies 5000 Series Specifications

General

Brand	Agilent Technologies
Model	5000 Series
Category	Test Equipment
Language	English