In accordance with ISO/IEC Guide 22 and EN 45014
Agilent Technologies, Inc.
Santa Clara Division
5301 Stevens Creek Boulevard
Santa Clara, California 95052-8059
U. S. A.
Laser Dynamic Calibrator, 5529V/A
10886A Compensation Board, 10887B Calibrator
Board, 10751A/B/C/D Air Sensor,10757A/B/C/D/E/F
Material Sensor
This declaration covers all options of the product.
The product described above is in conformity with:
:
The requirements of the European Council Directive 89/336/EEC and carries the CE-marking accordingly.
EMC Standards as required under the Australian Radiocommunications Act. (Supplier Code N279)
CISPR 22: 1993 / EN 55022:1994 / AS/NZS 2064.1/2 - Class A
IEC 801-2:1991 / EN 50082-1:1992 - 4 kV CD, 8 kV AD
IEC 801-3:1984 / EN 50082-1:1992 - 3 V/m
IEC 801-4:1988 / EN 50082-1:1992 - 0.5 kV Signal Lines, 1 kV Power Lines
The requirements of the European Council Directive 73/23/EEC
IEC 1010-1:1990+A2 / EN 61010-1:1993
Date: December 12, 1995
_
Bruce Euler, Quality Engineering Manager
Contact your local Agilent Technologies Sales and Service Office in Americas; in Asia Pacific or in Europe: Hewlett-Packard
GmbH Department ZQ/Standards Europe Herrenberger Straße 130, D-7030 Böblingen (FAX: +49-7031-143143)
WARNING: This is a Class A product. In a domestic environment this product may cause radio interference,
in which case, the user may be required to take adequate measures.
To Next Page
Loading...
Need help?
General
