160
Accessories
Connector Interfaces and Other Accessories
Option 201, Angled Contact Connector
If you want to use angled contact connectors (such as FC/APC,
Diamond HRL-10, DIN, or SC/APC) to connect to the instrument,
you must
1. attach your connector interface (see the list of connector
interfaces below) to the interface adapter,
2. then connect your cable.
Figure B-2 Angled Contact Connector Configuration
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
