Agilent Technologies 8156A - Units; Command Summary; Table 8-1 Units and Allowed Mnemonics; Table 8-2 Common Command Summary

89
Remote Commands
Units
8.1 Units
The units and all the allowed mnemonics are given in the table
below.
Table 8-1 Units and Allowed Mnemonics
Where units are specified with a command, only the Default is
shown, by the full range of mnemonics can be used.
8.2 Command Summary
Table 8-2 Common Command Summary
Unit Default Allowed Mnemonics
deciBel DB DB
deciBel/1mW DBM DBM DBMW
meter MPM, NM, UM, MM, M
Command
Parameter/
Response Min Max Function
*CLS Clear Status Command
*ESE <value> 0 255 Standard Event Status Enable
Command
*ESE? <value> 0 255 Standard Event Status Enable Query
*ESR? <value> 0 255 Standard Event Status Register
Query
*IDN? <string> Identification Query
*OPC Operation Complete Command
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com