• The following work should be carried out by a qualified
electrician. All local electrical codes must be strictly observed:
If the plug on the cable does not fit the power outlet, or if the cable
is to be attached to a terminal block, cut the cable at the plug end
and rewire it.
The color coding used in the cable depends on the cable supplied. If
you are connecting a new plug, it should meet the local safety
requirements and include the following features:
• Adequate load-carrying capacity (see table of specifications).
• Ground connection.
• Cable clamp.
:$51,1* To avoid the possibility of injury or death, please note that the
Agilent 8156A does not have a floating earth.
:$51,1* The Agilent 8156A is not designed for outdoor use. To prevent
potential fire or shock hazard, do not expose the instrument to rain
or other excessive moisture.
:DUQLQJVDQG&DXWLRQV
:$51,1* The WARNING sign denotes a hazard. It calls attention to a
procedure, practice, or the like, which, if not correctly performed or
adhered to, could result in personal injury. Do not proceed beyond a
WARNING sign until the indicated conditions are fully understood
and met.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
