Agilent Technologies 8565EC Service Guide

322 Chapter7
General Troubleshooting
Introduction
Service Cal Data Softkey Menus
The jumper on A2J12 is shipped from the factory in the WR PROT
(write protect) position (jumper on pins 2 and 3). When the jumper is
set to the WR ENA (write enable) position (jumper on pins 1 and 2), an
additional service cal data menu is displayed under
CAL. Figure 7-5 on
page 323 illustrates those areas of the service cal data menu that are
available.

Agilent Technologies 8565EC Specifications

General

Brand	Agilent Technologies
Model	8565EC
Category	Measuring Instruments
Language	English