Chapter 2 55
Adjustment/Diagnostic Software
Getting Started
Test Equipment
Table 2-2 on page 56 lists the test equipment required to perform the
automated adjustments. Test equipment which is not listed here is not
compatible with the adjustment/diagnostic software. You do not need
all the test equipment connected to perform the adjustments. You need
only connect the equipment specified in each adjustment to run that
adjustment.
Warm-up Time
Test Equipment Warm-up
Allow sufficient warm-up time for test equipment. Refer to their
individual operating and service manuals for warm-up specifications.
To Next Page
Loading...
Need help?
General
