aurora
Sonata
Hand Held ISDN Tester—User Guide
3-54 427869
Answering the call manually
When aurora
Sonata
receives a call which is to be connected
manually, it displays an Incoming Call window.
Notes:
• The CLI display allows you to test the CLIP/R
supplementary service—see Chapter 4 section 5.
• The CPN display shows the number the caller dialled.
This may not be the same as the connected number—for
example, when the call has been forwarded.
• You can test the Call Deflection supplementary service at
this point—see Chapter 4 section 5 for instructions.
To connect the incoming call:
-1-
Press the Off Hook ( ) function key.
aurora
Sonata
displays the Connected screen.
To reject the call:
-1-
Press the Clear function key. aurora
Sonata
displays
the Clearing Cause Code—see Clearing an
ISDN Call later in this section for details.
To Next Page
Loading...
Need help?
General
