aurora
Sonata
Hand Held ISDN Tester—User Guide
4-48 427869
Setting up the Teleservice test details
When you have selected the Teleservice component test, you
can set up the test details as follows:
-1- In the Available services component display
screen, highlight Teleservice and press the
Setup function key.
-2- You can choose to perform either a local test
(to the local exchange) or a distant test (to a
remote user). To do this:
• Select Destination to display an option
window.
• Highlight either Local or Distant and
press ENTER. The option window closes.
For a distant test you need to enter the number of the remote
device. When you select Distant, the CPN and (ETSI only)
SUB settings are added to the setup menu.
-3- Enter the CPN and sub-address for a distant
test, if required.
Note
If you set a new CPN here, it is used for all components of all
one-button tests.
To Next Page
Loading...
Need help?
General
