Issue 2 - 07/00 4-49
Testing in Simulation Mode - Section 4
To set up a new CPN for the test:
• Select CPN to display an entry window.
Enter a CPN as normal—for instructions,
see Identifying the CPN for the call in
Chapter 3 section 2.
• Select SUB if required and repeat the
process.
Tip
You can use the Recall and Save function keys to access
numbers in aurora
Sonata
’s speed-dial directory. For details on
speed-dialling, see Chapter 6 section 1.
-4-
You need to select the services to be checked
during the test. For example, you may want to
check only those services that are available on
the network you are testing.
• Select Teleservices. aurora
Sonata
displays a
list of the services which can be checked.
• Select the services to be checked by
pressing ENTER to tick or clear the
appropriate boxes.
• Press ESC to return to the setup menu.
-5-
When you have set up the test details, press
ESC to return to the Available services
component display, and ESC again to return to
the main ISDN Test Suite.
To Next Page
Loading...
Need help?
General
