Agilent Technologies auroraSonata User Manual

Issue 2 - 07/00 4-53
Testing in Simulation Mode - Section 4
• Select Last TEI and repeat the process for
the last TEI in the test range.
-4- When you have set up the test details, press
ESC to return to the Line Configuration
component display and ESC again to return to
the main ISDN Test Suite.
Starting the test
-1-
With Line Config. highlighted, press the Go
function key.
Understanding the test results
During the test aurora
Sonata
displays the result (Pass or Fail) for
each TEI in the range being tested. The Status bar displays the
TEI currently being checked. When the test is complete,
aurora
Sonata
lists the results for all TEIs in the tested range.
aurora
Sonata
stores the most recent set of results for the
component, and you can view them from the Review Results
menu (see section 1). For example:

Agilent Technologies auroraSonata Specifications

General

Brand	Agilent Technologies
Model	auroraSonata
Category	Test Equipment
Language	English