aurora
Sonata
Hand Held ISDN Tester—User Guide
4-60 427869
Tip
You can display this menu by choosing Dial Options from the
ISDN Setup menu (see Chapter 3 section 1). However, to
make testing more convenient aurora
Sonata
also lets you access
the menu by pressing the Opt function key in the Outgoing
ISDN Call menu for the test call.
Calling Line ID Presentation/Restriction
Calling Line ID Presentation (CLIP) allows a subscriber
receiving a call to display the caller’s ISDN number. The service
operates even when the subscriber’s line is busy.
Calling Line ID Restriction (CLIR) allows a subscriber
making a call to choose whether or not their ISDN number is
presented to the person they are calling.
Setting up CLIP/CLIR
To test CLIP/CLIR, you need to define a number and set up
aurora
Sonata
to send it for all outgoing calls. You can then make
calls to test whether the presentation of this number is
allowed or restricted.
-1-
From the Dial Options menu, choose
CLI/COL.
-2-
Choose whether aurora
Sonata
sends the number:
• Select Send to display an option window:
To Next Page
Loading...
Need help?
General
