Issue 2 - 07/00 3-15
First Steps in Testing - Section 1
-2-
Press ENTER to display the current settings for
the key. For example:
To change a Hot Key’s name:
-1-
Highlight Name and press ENTER to display
an alphanumeric entry screen.
-2-
Enter the new name (up to 17 characters). For
instructions,
see Entering alphanumeric
information in Chapter 2 section 3.
-3-
Press the OK function key to save the new
name and return to the list of settings.
To change the settings assigned to a Hot Key:
-1-
Highlight each setting and press ENTER to
display an option window. For example:
-2-
Change the setting as required. For details of
the specific settings, see the relevant section of
this chapter.
Setting up the Layer 2 protocol
Layer 2 (the ‘data link’ layer of the OSI 7-layer model)
provides a secure, error-free connection for Layer 3 call
control information by arranging the bits in error checked
frames.
For more information, see the Introduction to ISDN or the
Help screens provided with aurora
Expert
for Windows.
To Next Page
Loading...
Need help?
General
