18 1100 Series WS MWS Reference Manual
1 Installing the Sampler
Accessory Kits
Each shipment contents an Accessory kit with the necessary tools to install
the system and to have an operating system.
• The Accessory kit (G1367-68705) shown in Table 2 is shipped with the
(G1367A) well-plate and the (G1368A) thermostatted well-plate samplers.
• The Accessory kit (G1377-68705) shown in Table 3 on page 19 is shipped
with the (G1377A) micro well-plate and the (G1378A) thermostatted micro
well-plate samplers.
Tabl e 2 Well-plate Sampler Accessory Kit Contents G1367-68705
Description Quantity Part Number
Capillary sampler-column (380 mm, 0.17 mm ID) 1 01090-87306
96 well-plate 0.5 ml, PP (pack of 10) 1 5042-1386
Tubing assembly 1 5063-6527
Filter kit 1 5064-8240
CAN cable, 1 m 1 5181-1519
Vials, screw cap 100/pk 1 5182-0716
Blue screw caps 100/pk 1 5182-0717
Valve catalog 1 5988-2999
Hex key 9/64 inch (for injection-valve screws) 1 8710-0060
Wrenches 1/4 – 5/16 inch 2 8710-0510
Rheotool socket wrench 1/4 inch 1 8710-2391
Hex key 4.0 mm, 15 cm long, T-handle 1 8710-2392
Hex key 9/64 inch, 15 cm long, T-handle 1 8710-2394
Hex key 2.0 mm 1 8710-2438
ESD wrist strap 1 9300-1408
Air channel adapter 1 G1329-43200
Capillary pump-sampler (900 mm, 0.17 mm ID) 1 G1329-87300
WPS leak kit 1 G1367-60006
To Next Page
Loading...
Need help?
General
