Agilent Technologies InfinityLab LC Series User Manual

Agilent InfinityLab LC Series Vialsamplers User Manual 119
3Using the Module
Install the Optional Sample Cooler/Sample Thermostat
1 Ensure that the power switch on the front of the module
is OFF (switch stands out).
2 Disconnect the power cable from the sampler.
3 Loosen the four screws on the rear of the module. 4 Remove the sheet metal back cover of the sampler.

Agilent Technologies InfinityLab LC Series Specifications

General

Brand	Agilent Technologies
Model	InfinityLab LC Series
Category	Laboratory Equipment
Language	English