Agilent Technologies InfinityLab LC Series - Prepare a Sampler with Cooler;Thermostat for Transportation

Agilent InfinityLab LC Series Vialsamplers User Manual 133
3Using the Module
Transporting the Sampler
Prepare a Sampler with Cooler/Thermostat for
Transportation
When
The module needs to be transported or relocated.
WARNING
Heavy weight
The module is heavy.
 Carry the module at least with 2 people.
 Avoid back strain or injury by following all precautions for lifting heavy
objects.
 Ensure that the load is as close to your body as possible.
 Ensure that you can cope with the weight of your load.
CAUTION
Condensate inside the cooler or thermostat
Damage to the electronics
 Unplug the power cords.
 Drain off all condensate before dismounting the sample cooler or
thermostat.
 Make sure that there is no condensate left.
CAUTION
Unsecured transportation
Mechanical damage
 Secure the transport assembly before transporting the sampler.
NOTE
Moving the sampler with the Sample Cooler/Sample Thermostat installed is
possible for short distances (for example, from one workbench to another). For
longer transportation, remove the cooler/thermostat from the sampler and
handle the units separately.