Agilent Technologies InfinityLab LC Series User Manual

Agilent InfinityLab LC Series Vialsamplers User Manual 206
7Error Information
Vialsampler Error Messages
Motor alignment failed
Error ID: 34221
The alignment of the transport assembly stepper motors failed during the
initialization process.
• 34221,0 corresponds to the X-axis stepper motor.
• 34221,1 corresponds to the Z-axis stepper motor.
• 34221,2 corresponds to the theta stepper motor.
• 34221,3 corresponds to the gripper stepper motor.
Probable cause Suggested actions
1 Potential hardware error
Please contact your Agilent service representa-
tive.

Agilent Technologies InfinityLab LC Series Specifications

General

Brand	Agilent Technologies
Model	InfinityLab LC Series
Category	Laboratory Equipment
Language	English