Agilent Technologies InfinityLab LC Series

To Next Page

To Previous Page

Agilent InfinityLab LC Series Vialsamplers User Manual 58

3Using the Module

Status Indicators

This procedure exemplarily shows an arbitrary LC stack configuration.

1 The module status indicator indicates one of six possible module conditions:

Status indicators

1. Idle

2. Run mode

3. Not-ready. Waiting for a specific pre-run condition to be reached or

completed.

4. Error mode - interrupts the analysis and requires attention (for example a

leak or defective internal components).

5. Resident mode (blinking) - for example during update of main firmware.

6. Bootloader mode (fast blinking). Try to re-boot the module or try a

cold-start. Then try a firmware update.

Agilent Technologies InfinityLab LC Series - Status Indicators