Agilent Technologies InfinityLab LC Series - Sample temperature control switched off due to supply voltage drop; Cooler condensate sensor defect; Cooler PCB is in error mode

Agilent InfinityLab LC Series Vialsamplers User Manual 215
7Error Information
Sample Cooler/Sample Thermostat Error Messages
Sample temperature control switched off due to
supply voltage drop
Error ID: 30718
The compressor is turned off due to an unexpected drop in the supply voltage.
Cooler condensate sensor defect
Error ID: 30719
The condensate sensor of the cooler/thermostat is not working properly.
Cooler PCB is in error mode
Error ID: 30275
The system is in the error state because the compressor control board has
encountered an unexpected error.
Probable cause Suggested actions
1 Potential hardware error
Please contact your Agilent service representa-
tive.
Probable cause Suggested actions
1 Potential hardware error
Please contact your Agilent service representa-
tive.
Probable cause Suggested actions
1 Potential hardware error
Please contact your Agilent service representa-
tive.