Agilent InfinityLab LC Series Vialsamplers User Manual 329
11 Hardware Information
Setting the 6-bit Configuration Switch
Table 26 Boot Resident / Forced Coldstart
SW1 SW2 SW3 SW4 SW5 SW6 Init Mode
1 0 0 0 0 0 Boot Main System / Keep Data
1 1 0 0 0 0 Boot Resident System / Keep Data
1 0 0 0 0 1 Boot Main System / Revert to Default Data
1 1 0 0 0 1 Boot Resident System / Revert to Default Data
Note: The setting '0' (down) is essential.
To Next Page
Loading...
