144 Chapter 3
Mode
Adjacent Channel Power—ACP (I&M) Measurement
Mode
Ctr to Adj Step Size Sets the frequency step size between the center and the adjacent
channels.
Adj to Adj Step Size Sets the frequency step size between adjacent channels.
Num Adj Chans Sets the number of adjacent channels to show on the display.
Range On | Off
Key Path
Meas Setup, Format/BW, Channel BW/Time/Freq Err, Freq Error Limits
On/Off
Mode Channel Analyzer
Dependencies /
Couplings
Format Type must be set to Cust
Preset 200 kHz
State Saved Saved in instrument state.
Min 10 kHz
Max 5 MHz
Key Path
Meas Setup, Format/BW, Ctr to Adj Step Size
Mode Channel Analyzer
Dependencies /
Couplings
Format Type must be set to Cust
Preset 200 kHz
State Saved Saved in instrument state.
Min 12.5 kHz
Max 5 MHz
Key Path
Meas Setup, Format/BW, Adj to Adj Step Size
Dependencies /
Couplings
Format Type must be set to Cust
To Next Page
Loading...
