Chapter 3 159
Mode
Two Port Insertion Loss Measurement
Mode
Marker
Accesses the marker selection and settings functions.
Marker
Selects one of four possible markers. A marker that has already been turned on will
become active when it is selected. If a marker has been turned on and assigned to a specific
trace, it will become active on that trace if that marker is selected.
Marker Type
Mode Stimulus / Response
Remote Command :CALCulate:TPILoss:NORMalize[:IMMediate]
Example CALC:TPIL:NORM
Remote Command
Notes
In Two Port Insertion Loss, pressing the Normalized button will
take a sweep, and after the user finished with the
“Normalization screen”, the analyzer will do another sweep to
complete the normalization process.
Remotely, sending the “normalize” command will notify the
analyzer to do the correct thing. The “Normalization Screen”
will not be displayed, the normalization process will start
immediately.
Key Path
FREQ/Channel, Normalize
Mode SR
Key Path Front-panel key
Mode SR
State Saved Saved in State
Key Path
Marker, Marker 1 2 3 4
Mode SR
To Next Page
Loading...
