Chapter 3 199
Mode
One Port Insertion Loss Measurement
Mode
Avg Limits On/Off Turns on/off the average limit values.
Max Loss Limit Sets the maximum average limit value. If the average limits are turned on, then
the measured average insertion loss will be compared with this value.
Min Loss Limit Sets the minimum average limit value. If the average limits are turned on, then
the measured average insertion loss will be compared with this value.
Trace/Detector
Accesses the Trace/Detector menu keys. Trace/Detector menu keys allow the user to control
the acquisition, display, storage, detection and manipulation of trace data. The
Trace/Detector keys are for setting up a One Port Insertion Loss measurement. The
measurement must already be running to access these keys. Press
Meas, One Port Insertion
Loss
to turn on the measurement.
Mode Stimulus / Response
Preset 0
Range On|Off
Key Path
Meas Setup, Avg Limits, Avg Limits On/Off
Mode Stimulus / Response
Preset 10 dB
Key Path
Meas Setup, Avg Limits, Max Loss Limit
Mode Stimulus / Response
Preset 0 dB
Key Path
Meas Setup, Avg Limits, Min Loss Limit
Mode Stimulus / Response
Key Path Front-panel key
To Next Page
Loading...
