218 Chapter 3
Mode
Return Loss
Mode
Level: 2nd Segment Right
Sets the power level, for the 2
nd
segment to the Right of the Center segment. This key is only available when
2
nd
has been selected with the Segments key.
Trace/Detector
Accesses the Trace/Detector menu keys. Trace/Detector menu keys allow the user to control
the acquisition, display, storage, detection and manipulation of trace data. The
Trace/Detector keys are for setting up a Return Loss measurement. The measurement must
already be running to access these keys. Press
Meas, Return Loss to turn on the
measurement.
State Saved Saved in instrument state.
Min –10 dB
Max 150 dB
Key Path
Meas Setup, Limit Masks, Limit Mask 1, 2nd Segment: Left Level
Default Unit dB
Mode Stimulus / Response
Notes
Key is only displayed when the selected segment is 2
nd
, and the
selected segment side is Right.
Preset Not affected by a preset but set per default to 30 dB after a
power cycling
State Saved Saved in instrument state.
Min –10 dB
Max 150 dB
Key Path
Meas Setup, Limit Masks, Limit Mask 1, 2nd Segment: Right Level
Default Unit dB
Mode Stimulus / Response
Range Two Port Insertion Loss | One Port Insertion Loss | Return Loss
| Distance to Fault
Key Path Front-panel key
To Next Page
Loading...
